Floor Screed Machine HD 50
6
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
2.4 Protective
Devices
Prior to starting up the machine, all the safety devices must be prepared to function. The protective grills
are a fixed safety device and can never be removed while the machine is functioning. The HD-50/07 machine
fulfils all the requirements of European safety standards for construction machinery.
Never put your hand through
the safety grill !
2.5
Safety measures in normal operation
Only start the machine when all the protective devices are fully functioning. Ensure prior to connection
that no one is in any danger.
Check at least on a daily basis, the machine and all its accessories, such as the transport pipes, and the
automatic outlet tripod to ensure that there is no external damage and that the protective devices are in place.
Above all, check the transport pipes for breakages, dents or damage to the material.
Check for wear, correct functioning, breakages or possible indication of damage to the transport pipes,
or at least every 3 months all the transport pipes should be changed along with their couplings.
2.6 Service
and maintenance, prevention of breakdowns
•
Carry out any adjustments, required maintenance and inspection work within the specific term.
Flexible rubber pipes with their couplings are subject to natural wear, through rubbing and ageing. A
specialist should check (at least every 3 months) that they are in good condition and change them if
necessary. This process should be noted on the checklist provided for this purpose.
•
In all maintenance, inspection and repair work, ensure that the machine is not connected to the
electrical power and in particular that it is not accidentally reconnected by pressing the connection
switch.
•
Place a warning sign to prevent any accidental connection.
•
Check helicoidal combinations released during adjustment. Check protective functions and
devices when maintenance work is complete.
2.7
Mechanical changes to the machine
DO NOT carry out, without the manufacturer’s prior authorization, any changes in the installation or
any alteration to the machine. This also applies to welding of supporting parts. All changes require the
manufacturer’s written authorization. All reforms require the written authorization of the manufacturer,
UTIFORM.
Any parts which are not in perfect condition should be changed immediately. Use only original spare
parts and wearing parts.
Using parts which are not original means that there is no guarantee that they have been built and
manufactured in a safe and resistant manner, and therefore the machine guarantee is from that moment invalid.
