Floor Screed Machine HD 50
47
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
9.10.7.1. - Check the state of the filter separator.
If there is any suspicion of dirt or deterioration of the filter separator, request a check from the
UTIFORM service dept.
9.10.7.2. - Low grain size material return.
Due to the importance for correct functioning of the compressor, of correct low grain size
material return from the compressor filter separator, check that the low grain size material pipe is not
blocked in any part.
9.10.8 Oil filter
In order for the equipment to function effectively, the compressor should be injected with sufficient oil,
by the pressure injection. Therefore, it is necessary to ensure that loss of charge in the oil circuit through the
filter is kept to a minimum.
9.10.9 Air and oil radiator
Care should be taken to ensure that the radiator is kept clean, both its external face and its interior, since
if this is not the case it will lose efficiency, and in some cases alter the efficient operation of the unit.
In order to clean, depending on the work conditions, and having stopped and depressurized the unit
beforehand, dismantle the fan protection and blow compressed air or spray water through the cooler panel
removing any dirt. (Take care not to send the debris in the direction of the compressor aspiration). For more
thorough cleaning, use the UTIFORM service dept.
9.10.10 Motor
For motor maintenance, repairs or any anomaly, consult and follow the instructions in the Manual
(Instructions and Handling) which comes with each unit. If, despite this, you still have difficulties, call a
UTIFORM technician or the motor manufacturer.
9.11
Additional maintenance every 8 hours of operation or on a daily basis.
Prior to commencing the work
•
Check the hoses and couplings to ensure that they are in good condition.
•
Check the oil level in the diesel motor.
•
Check the oil level in the compressor.
•
Check the fuel level
•
Self lubrication system: Check whether the amount of grease in the recipient is sufficient.
When running
•
Check that the self lubrication system is working correctly
•
Check the amount of fuel.
When work is finished
•
Scrupulously clean the machine. A thorough clean after every job considerably prolongs the
useful life of the machine. Use a biodegradable preservative for machines.
•
Check the hoses, couplings and belts for defects or wear.
•
Check the air filter dirt indicators.
