UAD‑2 Live Rack Manual
Chapter 4: Live Rack Application
66
Power
The Power option deactivates an individual plug‑in
within a single insert slot. When deactivated, the
plug‑in no longer uses UAD DSP resources. Click the
modifier to change the power state.
When Power is latched, deactivated plug‑ins are
indicated by a red modifier, and active plug‑ins have a
green modifier.
Caution:
Because this function unloads and loads the plug-in from the DSP, audio
artifacts can occur if the power state is changed while audio is being processed by
the plug-in. To disable individual plug-in processing without audio artifacts, use
the power control within the plug-in interface in Channel View instead (however,
the interface control method does not reduce DSP loads).
Remove
The Remove option permanently deletes the plug‑in
from the insert slot. When Remove is latched, click the
modifier to delete the plug‑in.
Important:
If the plug-in settings are modified and
unsaved in a preset, the modified settings are lost
with this function (Remove cannot be undone).
Caution:
Because this function unloads the plug-in from the DSP, audio artifacts
can occur if a plug-in is removed while audio is being processed by the plug-in.
Move
The Move option is used to move an individual plug‑in
(and its active settings) from one insert slot to another
insert slot in any channel within the Current Bank.
Move can also be used to move a complete channel
strip (all plug‑ins in the channel column) from one
channel to another channel within the Current Bank.
Move Individual Plug-In
When Move is latched, drag any insert modifier to move
the plug‑in to another slot. If a plug‑in exists in the destination slot, the existing plug‑in
is bumped to a different slot within the same channel.
Move Channel Strip within same bank
When Move is latched, drag any column modifier (above the plug‑in inserts) to another
channel to move the all plug‑ins in the source column to the destination column.
Important:
If plug-ins exist in the destination channel, all existing plug-ins in the
destination channel are deleted. Move operations cannot be undone.
