Tyco DSC WK250, Руководство по установке, Страница: 80 / 92

4. Periodic Test by Installer Code
80 D-306488 WK250 Installer’s Guide
Option Instructions
1. Press to enter the " TEST ONE DEVICE " sub menu and use to
navigate to " SHOCK SENSORS ".
2. Press ; the following screens will appear: " Zxx:Shk+AX+CntG3 "
1

<location> .
3. Press continuously to select a different zone number.
4. Press ; the following screens will appear: " Zxx ACTIVATE NOW " 
"SHOCK NOT ACTIV
." 
"CNTACT NOT ACTIV
" 
"AUXIL. NOT ACTIV
".
Note: The above screens are the full range of screens that can appear and indicate
the inputs that have not yet been activated. However, since there are various
models of the shock detector, not all of these screens will appear on some models.
5.
At this stage, activate each input of the shock detector in turn.
To test motion detector with integrated camera (Next CAM PG2 or TOWER CAM
PG2):
1. Press to enter the " TEST ONE DEVICE " sub menu and use to
navigate to " MOTION SENSORS ".
2. Press ; the following screens will appear: " Z01:Motion Sens "

<location> .
3. Press continuously to select a different zone number.
4.
Press ; the following screen will appear: "
Zxx ACTIVATE NOW
".
5. Activate the input of the detector; the following screens will appear: " <Zxx IS
ACTIVATE> "

"<OK> SEND IMAGE" .
1
Depending on shock detector model, one of the following may appear instead: " Zxx:Shk+AX " / " Zxx:Shk+CntG3 " /"
Zxx:Shk+CntG2 ".