3. Programming
62
D-306488 WK250 Installer’s Guide
Step 2
Step 3
SIM NUMBER TEST
Tst by IP RCVR 1
SIM# verified
Tst by IP RCVR 2
BROADBAND MODULE
PLEASE WAIT…
Unit is OK
3.9.2 Testing Wireless Devices
The WP enables you to test the wireless devices attached to the panel. You can test all devices, one device at a time,
display devices' status and review RF problems, in case of any.
07:DIAGNOSTICS
⋅⋅⋅
WL DEVICES
⋅⋅⋅
MENU you wish
Enter the "
WL DEVICES
" menu, select the type of test you wish to perform (see guidance above and in section 3.9.1),
and then refer to the table below which provides you with detailed explanations for each option.
Option
Instructions
TEST ALL DEVICES
You can test all devices automatically, one after the other.
While in "
TEST ALL DEVICES
", press
to initiate the test.
The devices are tested in the following order: wall-mounted devices, vanishing
magnetic contact devices, keyfobs and panic buttons.
At the end of the test process, the WK250 will present the following: "
SHOW ALL
DEVICES
". Press
to view devices' status.
Note:
Refer to the "
SHOW ALL DEVICES
" section below for further information on
device status.
Pressing any key during the testing process will open the following options:
1. Press
to jump to the next device group. For example, from wall-mounted
devices to keyfobs.
2. Press
to continue the testing process
3. Press
to exit the test process.
While in the vanishing test process, indicated by the corresponding display, for
example, "
TEST VANISH XX
", momentarily open the door or window.
While in the handheld devices test process, indicated by the corresponding display,
for example, "
TEST KEYFOBS XX
", press any key of the selected device to initiate
the test.