3. Programming
D-306488 WK250 Installer’s Guide
37
3.5.8 Configuring Miscellaneous Features
The following table provides you with a detailed description of each option and its configuration settings. To select an
option and change its configuration – refer to section 3.5.1.
Option and default
Configuration Instructions
75:CODE VERSION
000
Define the WP code version (default "000") which needs to be synchronized with
the monitoring station when the anti-code reset function is enabled (see menu
39). This allows the monitoring station personnel to provide the user, by
telephone, the proper reset code after the user has stated the Quote code. Enter
the code version (3 digits) 000 to 255.
91:USER PERMIT
disable
User Permission enables you to determine whether access to the INSTALLER
MODE requires the user's permission or not. If you select
enable
, the installer will
be able to access the system only through the user menu after the user code has
been entered (see section 3.2).
Options:
disable
or
enable
(default in UK).
Note:
To comply with
EN
requirements, "Enable" must be selected.
92:BATTERY TYPE
7.2V NiMH
Define which type of battery pack is used for the system to supply proper charge
current.
Options:
7.2V NiMH
or
9.6V NiMH
(default in UK).
93:SOAK PERIOD
disable
Define the period of time for the Soak Test.
Options:
disable
(default),
7 days
,
14 days
or
21 days
.
Notes:
1. If set to one of the above pre-defined period of times, to be operational Soak Test
mode must also be set to “
enable
” test from the “
02:ZONES/DEVICES
” menu (see
Section 3.4.6).
2. If a change is made to the period of time of the Soak Test while the zone is currently
being tested, this will restart the Soak Test.
3. The start of the Soak Test period
is defined in the factory from 9 AM (09:00).
3.6 Communication
3.6.1 General Guidance – "Communication" Flow-Chart & Menu Options
The COMMUNICATION menu enables you to configure and customize the communication and reporting of alarm,
troubles and other system events for monitoring companies or private users according to your local requirements and
personal preferences. WP offers a variety of communication means including telephone PSTN landline, Cellular GSM,
GPRS, EMAIL, MMS or SMS and IP via broadband internet connection.
The "
04.COMMUNICATION
" menu contains several sub-menu options, each covering a group of configurable features
and parameters related to the communication and reporting as follows (see detailed list in Step 3 of the chart below):
Option
Description of Option Features and Parameters
Section
1:PSTN TEL LINE
Contains configurable features and parameters related to the PSTN
telephone line to which the WP is connected.
3.6.2