Tyco DSC WK250, Руководство по установке, Страница: 56 / 92

3. Programming
56 D-306488 WK250 Installer’s Guide
3.7.4 PGM-5 Connection
05:OUTPUS
⋅⋅⋅
EXTERNAL PGM PGM-5 OPTIONS
If a PGM-5 module has been connected, proceed to enable the operation of the module as follows:
Step 1
Step 2
Step 3
Select "05:OUTPUTS" menu
Select "EXTERNAL PGM" menu
Press
 
05:OUTPUTS
EXTERNAL PGM PGM-5 OPTIONS
disable
Step 4
Step 5
Step 6
WK250 displays currently selected
setting
Select whether to "enable" or
"disable" the PGM-5 Press to return to “EXTERNAL PGM”
or to take you to “<OK> to Exit"
 
PGM-5 OPTIONS
disable
PGM-5 OPTIONS
enable
PGM-5 OPTIONS
enable
3.7.5 Entering Daytime Limits
05:OUTPUS
⋅⋅⋅
LOCKOUT TIME
Enter the " LOCKOUT TIME " menu and enter the daytime limits through which the PGM device will turn off, even when
the associated sensors are triggered.
Step 1 Step 2 Step 3
Select "05:OUTPUTS" menu Select "LOCKOUT TIME"
Press
 
OUTPUTS LOCKOUT TIME start time HH:MM
11:00
Step 4
Step 5 Step 6
Enter the time at which you wish the
lockout state to begin
Press
Press
start time HH:MM
11:00
start time HH:MM
09:30
stop time HH:MM
19:00
Step 7
Step 8
Enter the time at which you wish the
lockout state to end.
Press to return to “LOCKOUT
TIME” or
to take you to “<OK> to Exit"
stop time HH:MM
19:00
stop time HH:MM
16:30