Tyco ADT16E, Руководство пользователя

Страница: 78 / 83

User’s Manual
68
Appendix B — Troubleshooting
Problem Possible Solution
No Power
y
Check power cord connections.
y
Confirm that there is power at the outlet.
No Live Video
y
Check camera video cable and connections.
y
Check monitor video cable and connections.
y
Confirm that the camera has power.
y
Check camera lens settings.
Live Video Very Bright
If a cable is attached to the “Loop” connector, make certain it is
connected to a properly terminated device.
REC LED is Lit but DVR is not
recording
Unit will only record video based on the parameters such as
schedule and events defined during configuration. Red REC LED
indicates the DVR is ready to record.
DVR has stopped recording
If hard disk drive is full, you will either need to delete video or set
the DVR to the Overwrite Mode.
DVR displays an error message
stating that the last recorded
image date and time is later than
the current date and time setting
of the DVR.
The DVR will automatically reset the time and date of the unit,
according to the time and date of the last recorded image. If this is
not the correct time and date, reset the time and date manually. If
the correct time and date is earlier than the last recorded image, any
video with a later time and date will be lost when resetting the
correct time and date.