Tyco ADT16E, Руководство пользователя

Страница: 44 / 83

User’s Manual
34
Pre-Event Recording Setup Screen
Figure 47 — Pre-Event Record Setup screen.
When the DVR is in the Event Record mode it is possible to have it record images before the event occurs.
The
Pre-Event Record screen allows you to define how to handle pre-event recording.
You can turn individual cameras On or Off for pre-event recording. The image speed can be set from 0.1
to 60 ips (50 ips PAL), and image quality can be selectable from
High
,
Standard
and
Low
.
You can set the amount of time to record prior to the event by adjusting the
Dwell . You can set the Dwell
from 1 to 300 seconds.
NOTE: When the DVR is in the Time-Lapse mode, it ignores the pre-event settings and follows the
time-lapse settings.
Event Action Setup
You can program the DVR to record, activate the alarm output and/or notify the remote site whenever
sensor, motion or video loss events are detected. Highlight the
Alarm In Event Action , Motion
Detector Event Action
, or
Video Loss Event Action
in the Main menu. The following
Event Action
setup screens will appear.