Tyco ADT16E, Руководство пользователя

Страница: 54 / 83

User’s Manual
44
Highlight the box beside Connection . Press the button to toggle between LAN and Modem .
Highlight the box beside
Admin Password
and press the button. A virtual keyboard appears. You
will first be asked to enter the current password. Then you can enter a new password; you will be asked to
confirm the new password before it is accepted.
Highlight the box beside
User Password
and press the button. A virtual keyboard appears. You will
first be asked to enter the current password. Then you can enter a new password; you will be asked to
confirm the new password before it is accepted.
NOTE: These passwords are for network use. They are different from the Admin and User
passwords for the DVR itself.
NOTE: The passwords are case sensitive. The factory default password for both Administrator
and User is
12345678 .
CAUTION: Write the password down and keep it in a safe place. Once the password has
been reset, the default will no longer work. If the password is forgotten, the unit must be
reset using the
Factory Reset Button and all data settings will be lost.
Highlight the box beside
Transfer Control
. Press the button to toggle between
On
and
Off
. When
On
, you can set the transfer speed and remote quality of the image transferred to a computer running RAS
(Remote Administration System).
Highlight the box beside
Transfer Speed
and press the button. Select the transfer speed from 1 to 30
ips.
NOTE: The transfer speed you set is the maximum speed. Depending on the network
environment, this speed may not be achieved.
NOTE: The transfer speed indicates the image rate transferred to each RAS. If two remote sites
(RAS) are connecting to the DVR, the number of images transferred via network will be ‘Transfer
Speed x 2’.
NOTE: The Transfer Control option will affect the DVR’s recording performance. The number of
remote sites (RAS) connected to the DVR does not affect the recording speed. The local recording
speed will be affected only by Transfer Speed. The local recording speed will not be affected if the
DVR is not connected remotely.
NOTE: If Transfer Control is not used, the speed of data transfer to a remote site will be the same
as the local recording speed.
Highlight the box beside
Remote Quality
and press the button. Select the image quality from
Very
High
,
High
,
Standard
and
Low
.