Tyco ADT16E, Руководство пользователя

Страница: 32 / 83

User’s Manual
22
The DVR can be set to react to storage problems by activating an internal buzzer or external alarms,
and/or notifying a remote site. Highlight the box beside
Storage Problem Action: Alarm Out / Notify
and press the button to select from Beep, the alarm output terminal that you want to associate with the
storage problem event, and/or Notify.
Highlight
S.M.A.R.T. Setup… and press the button. The S.M.A.R.T. Setup screen appears.
Figure 31 — S.M.A.R.T. Setup screen.
Your DVR shows the condition of the hard disk drives if the installed IDE hard disk drives support the
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) program. Highlight the box beside
Use
. Press the button to toggle between
On
and
Off
.
The
Last-check field displays the date and time information of the last storage check.
Highlight the box beside
Period
, and select from
Daily
,
Weekly
or
Monthly
for the check interval.
NOTE: When selecting Weekly or Monthly , the Day of Week or Day of Month field will display
under the Period field. Select the check day or date.
Highlight the box beside
Check Time , and adjust the numbers using arrow buttons.
Highlight the box beside
Temperature Threshold
and adjust the numbers using arrow buttons. Set the
temperature number to the hard disk drive manufacturer’s specifications. If this temperature is ever
exceeded, the S.M.A.R.T. Alert message will display.
Highlight
the box beside
Sensor Unit
and select from Celsius or Fahrenheit.
You can save your changes by highlighting
OK
and pressing the button. Selecting
Cancel
exits the
screen without saving the changes.