Tyco ADT16E, Руководство пользователя

Страница: 67 / 83

Digital Video Recorder
57
CAUTION: Do NOT disconnect the USB cable or the power from the external drive while
copying clips. If the external drive is shut down or the USB cable is disconnected while
copying clips, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL
DRIVE COULD BE DAMAGED, and you will get an error message the next time you try to
copy clips. You will need to power down the DVR and restart it to get rid of the error
message. Once the file system of the USB-IDE hard disk drive has been corrupted, this
error message cannot be dismissed. Even after restarting the DVR it may automatically
restart while preparing clip copy. You must recover the file system using the recovery
program, or you must reformat the hard disk drive.
Load Default Setup
Highlighting and selecting
Load Default Setup
will bring up screen asking you if you really want to
load default settings and confirm it with a password.
NOTE: Loading the Default Setup will not change the current time, time zone, daylight saving time
and network settings.
Load / Save Setup
You can load saved DVR settings or save the current DVR settings.
To load saved DVR settings, connect the USB device containing the setup file (.cfg) to the DVR.
Highlight
Load – File Name
and press the
button. The
Load Setup
screen appears. The screen
displays setup file names that are available. Select the desired setup file and press the OK button. The
selected file name is displayed on the File Name field. Selecting Load will load the selected save
settings and change the DVR settings accordingly.
NOTE: Even after changing the DVR settings by loading saved settings, the time-related settings
(Date/Time, Time Zone and Daylight Saving Time) will NOT be changed.
NOTE: If you want to change the network settings, check Include network setup . Otherwise, the network
settings will NOT be changed.
To save the current settings, connect the USB device to the DVR. Highlight
Save – File Name
and
press the
button. A virtual keyboard allows you to enter the file name. Selecting
Save
will save the
current DVR settings in .cfg file format on the USB device.