Tyco ADT16E, Руководство пользователя

Страница: 40 / 83

User’s Manual
30
RS232/RS485 Setup Screen
The RS232/RS485 setup screen allows you to set up the RS232 and RS485 ports to communicate with
external devices such as modems, remote controls and dome cameras.
Figure 43 — RS232/RS485 setup screen.
Highlight the field for the settings you wish to make. Select the correct Baud Rate, Parity, Data Bits and
Stop Bits for the device you are connecting to the DVR.
For RS232, it is possible to select either
Remote Control
or
External Modem
in the
Usage
field. For
RS485, it is possible to select either
Remote Control
or
PTZ Control
in the
Usage
field.
NOTE: Both the RS232 and RS 485 ports cannot be configured to communicate with remote
controls at the same time.
NOTE: If networking is configured by the external modem, the RS232 port cannot be set up for the
remote control. In the
Network Setup menu, set up the DVR for LAN connections first.
Configuring Recording Settings
NOTE: Pressing the
REC
button on the front of the DVR will cause the red LED to light and
indicates the DVR is ready to record. However, this does not mean the DVR is recording. The DVR
records video based on the parameters such as schedule and events defined during
configuration.
Your DVR offers a variety of flexible recording modes. You can set it up to record all the time or to only
record events. It can be set up to continue recording once the hard disk drive is full by recording over the
oldest video, or you can set it up to alert you when the hard disk is full and stop recording.