Tyco ADT16E, Руководство пользователя

Страница: 14 / 83

User’s Manual
4
Connecting the Video Source
Figure 4 — Video input connectors.
Connect the coaxial cables from the video sources to the BNC
Video In
connectors.
Connecting the Loop Through Video
Figure 5 — Video Loop Through connectors.
If you would like to connect your video source to another device, you can use the
Loop
BNC connectors.
NOTE: The Loop BNC connectors are auto terminated. Do NOT connect a cable to the Loop BNC
unless it is connected to another terminated device because it will cause poor quality video.
Connecting the Monitor
Figure 6 — Video Out connectors.
Connect the monitor to either the
Video Out
or
SVHS Out
connector.
Connect the spot monitor to the
SPOT connector if required.
NOTE: If your monitor has an SVHS input, use it because it will give you better quality video
display.
NOTE: The Video Out (BNC) and the SVHS Out connectors may be connected to individual
monitors for simultaneous operation.