Tyco ADT16E, Руководство пользователя

Страница: 36 / 83

User’s Manual
26
Motion Detector
Figure 37 — Motion Detector setup screen.
Your DVR has built-in video motion detector. Video motion detector can be turned On or Off for each
camera.
Highlighting the box under the Sensitivity heading allows you to adjust the DVR’s sensitivity to motion.
There are five settings with 1 being the least sensitive and 5 being the most sensitive.
You can adjust the minimum number of detection blocks that must be activated to trigger a motion alarm.
Highlight a box under the
Min Size
heading and adjust the number. The smaller the number, fewer
detection blocks must be activated and therefore more sensitive.
Turning the View setting On will allow you to observe how the DVR is reacting to motion. When in the
motion viewing mode, the detection zone of video will be displayed in green. Any detected motion
within the zone will be displayed in red.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the
icon under the
Zone heading, and press the button. The Motion Detection Zone screen will display.