Tyco ADT16E, Руководство пользователя

Страница: 52 / 83

User’s Manual
42
Main Monitoring Setup Screen
You can adjust the display dwell time for each camera displayed on the main monitor. You can also turn
camera sequence and event monitoring on and off.
Figure 58 — Main Monitoring Setup screen.
Highlight the box beside Sequence Dwell Time and press the button. You can adjust the sequence
dwell time from 3 to 60 seconds.
Highlight the box beside
Sequence in Cameo
and press the button to toggle between
On
and
Off
.
Pressing the
SEQUENCE
button causes the DVR to sequence cameras, and the DVR can sequence
cameras in two modes: “Page” and “Cameo”. In the Page mode, the DVR sequences through
user-defined screen layouts (pages). In the Cameo mode, the bottom right window in a multi-screen
format sequences through all cameras.
NOTE: The DVR does not sequence the camera having video loss in the Cameo mode.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different
screen layouts (pages) so that all the cameras will be displayed. You can also set up the DVR to display
one camera or a group of cameras all the time while cycling through the remaining cameras in a “cameo”
window. This can be done with one camera displayed full screen while displaying the cameo window as
a PIP (picture in picture), or displaying the cameras in a grid pattern with the bottom right window as the
cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel and 3x3 mode of the
9-channel DVR.
Highlight the box beside
Event Monitoring
and press the button to toggle between
On
and
Off
.
When it is
On
, the video of the lowest camera number among cameras associated with the event-detected
sensor will be displayed in full-screen on the main monitor during the preset dwell time.
Highlight the box beside
Event Monitoring Dwell Time
and press the button. You can adjust the
event monitoring dwell time from 3 to 60 seconds.