Tyco ADT16E, Руководство пользователя

Страница: 61 / 83

Digital Video Recorder
51
Highlight the box beside
E-mail recipient
and enter the recipient’s e-mail address. Use the virtual
keyboard to enter the e-mail address.
Highlight the box beside
E-mail sender
and enter the sender’s e-mail address.
NOTE: The e-mail address must include the character “@” to be a valid address.
Highlight the box beside
Authentication
and press the
button to toggle between
On
and
Off
.
Highlight the box beside
ID and enter the SMTP ID. A virtual keyboard appears allowing you to enter the
ID.
Highlight the box beside
Password
and enter the SMTP password. A virtual keyboard appears allowing
you to enter the password.
NOTE: Authentication should be turned On and ID and Password should be entered when using
the SMTP server requiring user authentication.
Callback Center Setup by Modem connections
Figure 68 — Callback Center (Modem) Setup screen.
Highlight the box beside
Pager Number
and enter the telephone number of the pager. Enter the number
as it must be dialed from your telephone system; for example,, if you must dial “9” for an outside line,
enter “9” before the pager number.
Highlight the box beside
Mailbox and enter the voice mailbox number if your pager uses a voice mailbox.
Highlight the box beside
Site ID
and enter a three-digit site ID number.
When an event occurs, the DVR will dial the pager and leave a four- or five-digit number. The first three
digits are the site ID number and the last digits are the type of event (1: Alarm In, 2: Motion Detection, 3:
Video Loss, 8: Check Recording, 10: Storage is Bad, 12: S.M.A.R.T Alert and 17: System). For example,
“0753” means that Site 75 has lost video.