Tyco ADT16E, Руководство пользователя

Страница: 64 / 83

User’s Manual
54
The
Quick Setup
screen allows you to set up the most commonly used features of your DVR. Use the
arrow buttons to move through the options. Pressing the button lets you make your selections.
NOTE: If you enter the Quick Setup screen by entering User password, only Password setup will
be permitted.
Highlight the box beside Quick Setup and press the button to toggle between On and Off . If you
select
Off
, you will use the
Normal Setup
screen to change the DVR’s settings.
Highlight the
Recording Speed
box and select recording speeds from as few as one image every 10
seconds to as fast as 60 ips.
NOTE: The DVR has a maximum recording speed of 60 ips per camera, however, the recording
speed may not be achieved when averaged over all cameras.
Highlight the
Recording Quality
box and select from
Very High
,
High
,
Standard
and
Low
.
Highlight the box beside Audio Recording and select either On or Off .
NOTE: It is the user’s responsibility to determine if local laws and regulations permit recording
audio.
Highlight the box beside
Sequence Dwell Time
and select from 3 to 60 seconds for the camera
sequence dwell time.
Selecting System Information… enters that screen.
Selecting
Storage…
enters a screen where you can check the storage status.
Selecting
Camera…
enters a screen where you can set up camera information.
Selecting Network Setup… enters a screen where you can set up network information.
Selecting
Password…
enters a screen where you will be able to change passwords.
Selecting
Date/Time…
enters a screen where you will be able to set the DVR’s time and date.
Selecting System Shutdown… shuts the DVR down. When shutting down the DVR, you need to
confirm that you want to shut down the unit, you will be asked for an administrator password.
NOTE: The Quick Setup mode will be released automatically when the user changes the DVR
settings remotely using the RAS(Remote Administration System) program.