Tyco ADT16E, Руководство пользователя

Страница: 58 / 83

User’s Manual
48
Modem Setup
Figure 65 — Modem Setup screen.
NOTE: Modem setup is done through the RS232/RS485 screen in the Devices menu which can be
accessed from the Main Menu.
NOTE: If the RS232 port is in use for the remote control, the networking cannot be configured by
the modem. In the
RS232/485 Setup menu, set up the RS232 port to communicate with the
external modem first.
Highlight the box beside Baud Rate of the RS232 field and press the button. A list of baud rates
ranging from 300 to 115,200 appears.
Highlight the box beside
Parity
of the RS232 field and press the button. A drop-down list appears.
You can select from
None
,
Odd
or
Even
parity.
Highlight the box beside Data Bit of the RS232 field. Pressing the button toggles between 7 bit and 8
bit formats.
Highlight the box beside
Stop Bit
of the RS232 field. Pressing the button toggles between 1 and 2
Stop Bits.
You can save your changes by highlighting OK and pressing the
button. Selecting
Cancel exits the
screen without saving the changes.