Tyco ADT16E, Руководство пользователя

Страница: 17 / 83

Digital Video Recorder
7
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5 cable with an RJ-45
jack to the DVR connector. The DVR can be networked with a computer for remote monitoring,
searching, configuration and software upgrades. See
Chapter 3 — Configuration for configuring the
Ethernet connections.
Connecting to the USB Port
Figure 12 — USB connector.
Two USB ports are provided to connect external hard disk drives, CD-RW or flash drive for clip copy or
system upgrade. Position the external hard disk drive close enough to the DVR so that you can make the
cable connections, usually less than 6 feet. Use the USB cable provided with the hard disk drive to
connect it to the DVR.
Connecting to the RS232 Port
Figure 13 — RS232 connector.
An RS232 port is provided to connect an external modem for remote monitoring, configuration and
software upgrades, and to connect a remote control keyboard. Use a modem cable with a DB-9S (female)
connector to connect to the DVR. See
Chapter 3 — Configuration for configuring the modem.
NOTE: The DVR is not supplied with a modem cable, and many modems are not supplied with
cables. Make certain you have the correct cable when purchasing the modem.
Factory Reset
Figure 14 — Factory reset switch.
The DVR has a Factory Reset switch to the right of the USB port. This switch will only be used on the
rare occasions that you want to return all the settings to the original factory settings.