Tyco ADT16E, Руководство пользователя

Страница: 56 / 83

User’s Manual
46
Figure 62 — Port Number Setup screen.
NOTE: You will need to get the appropriate Port Number for each RAS related program (Admin,
Watch, Search and Callback) from your network administrator.
Change the numbers by highlighting them and using the
Up
and
Down
arrow buttons to increase or
decrease the number.
The factory default Port settings are:
Admin:
8200
Watch: 8016
Search: 10019
Callback: 8201
NOTE: The system restarts automatically after changing the port settings.
NOTE: Do NOT use the same port number for two different programs, otherwise, the DVR cannot
be connected with a PC running RAS.
CAUTION: When changing the port settings, you must change the port settings on the
PC running RAS as well. Refer to the RAS manual for details.
You can save your changes and return to the
Network Setup
screen by highlighting
OK
and pressing the
button. Selecting
Cancel
exits the screen without saving the changes.
Selecting
DHCP
from the Type and highlighting
OK
reads the current IP Address of the DVR configured
by DHCP (Dynamic Host Configuration Protocol) network.