Trudell Medical International AeroEclipse XL, Руководство пользователя

Страница: 7 / 168

EN 5
5. Attach one end of the supplied EZ Twist TUBING to the fitting on the bottom of the nebulizer and the other end
to your compressed air source. Ensure both ends are securely engaged.
NEBULIZER TREATMENT
The reusable AEROECLIPSE * XL BAN can be operated in
CONTINUOUS MODE (constantly producing aerosol) by
rotating the MODE SELECTOR to the CONTINUOUS MODE
position ( – Fig. 2). The nebulizer can be returned to BREATH
ACTUATED Mode by rotating the MODE SELECTOR to the
BREATH ACTUATED position ( – Fig. 2).
UÊ Ü>ÞÃÊ vœœÜÊ ÞœÕÀÊ i>Ì V>ÀiÊ «ÀœviÃȜ˜>½ÃÊ ÌÀi>̓i˜ÌÊ
instructions.
UÊ / iÊÀiÕÃ>LiÊ AEROECLIPSE * XL BAN should be used with
the Ombra * Table Top or Portable Compressors or an air
source capable of delivering a flow of 3.5 to 5 litres per minute
(Lpm) under an operating pressure of 0.92 to 1.79 bar (13.3 to
26 pounds per square inch [psi]).
UÊ 7 i˜Ê Ì iÊ `iۈViÊ ˆÃÊ Liˆ˜}Ê ÕÃi`Ê ÌœÊ `iˆÛiÀÊ >iÀœÃœÊ ÌœÊ ÞœÕ˜}Ê
children or anyone requiring assistance, they should be
supervised at all times to ensure a safe and effective treatment.
BREATH ACTUATED MODE
Ensure the MODE SELECTOR is in BREATH ACTUATED position ( – Fig. 2).
1. While sitting in a comfortable, upright position, switch on your compressor.
2. Place the MOUTHPIECE in your mouth, ensuring your lips are sealed around the edge. Be careful not to
cover the EXHALATION VALVE on the bottom of the MOUTHPIECE , as doing so will prevent the valve from
functioning properly.
3. Inhale slowly and deeply. As you inhale, the GREEN FEEDBACK BUTTON on the top of the nebulizer (Fig. 1)
will move down, indicating that the reusable AEROECLIPSE * XL BAN is producing aerosol in response to
your inhalation.
4. Exhale normally through the device. The valve on the mouthpiece only opens during exhalation to allow air
to exit the device. This helps prevent re-breathing of exhaled air. During exhalation, the GREEN FEEDBACK
BUTTON returns to the up position indicating no aerosol is being produced (Fig. 7).
5. Continue to breathe normally through the device until it begins to make a ‘sputter’ noise or as instructed by your
healthcare professional.
6. Switch off the compressor when finished with your treatment.
NOTE : If you are unable to trigger the device during inhalation (unable to get the GREEN FEEDBACK
BUTTON to go down when you breathe in) it can be manually operated with your index finger by depressing/
releasing the GREEN FEEDBACK BUTTON in coordination with your breathing. Alternately, you may switch
the device to CONTINUOUS MODE ( – Fig. 2).
CONTINUOUS MODE
Ensure the MODE SELECTOR is in CONTINUOUS position ( – Fig. 2).
In CONTINUOUS Mode, the nebulizer may be used with the reusable ComfortSeal * Mask. Refer to ‘Setting Up
Your Nebulizer’, Step 3 on how to properly use a mask with the nebulizer.
1. While sitting in a comfortable, upright position, switch on your compressor.
Continuous Mode ‘down’ position
Breath Actuated Mode ‘up’ position
FIGURE 7