Tritech MicronNav страница 103 Скачать руководство пользователя

Страница: 103 / 144

Adding and Using User Bitmap Charts

MicronNav System

0656-SOM-00001-07

103

© Tritech International Ltd.

The chart normally contains a Latitude/Longitude reference which is not at Top-Left.

Seanet Pro will translate this position to a Top-Left reference for its own requirements.

This reference position can be further edited if required.

The chart image will be extracted and saved as a .TIF image and by default will be stored

in the folder:

C:/Program Files (x86)/Seanetv2/Charts/

Convergence

will apply an Eccentric grid correction according to Zone (normally required

for many BSB charts)

Skew Angle

will apply a skew angle to the chart. This value is loaded from the chart but

is editable to apply any further corrections.

6. Once the chart has been loaded an any necessary edits made, click on

Save Chart

close the dialog and return to the main screen. The chart will be selected and displayed.

Содержание MicronNav

















































































































































Результаты поиска

Содержание MicronNav

Отзывы:

Похожие инструкции для MicronNav

Бренды по названию

Популярные бренды

Tritech MicronNav, Руководство по эксплуатации продукта

Результаты поиска

Содержание MicronNav

Отзывы:

Похожие инструкции для MicronNav

Бренды по названию

Популярные бренды