Timewave PK-232MBX, Руководство по эксплуатации

Страница: 71 / 231

PK-232 MBX – OPERATING MANUAL MAILDROP OPERATION
8/91 5-5 71
5.4.6
K n (KILL n [Mine])
The "K n" command (Host abbreviation K1) deletes message number "n" from the Mail-
Drop. As SYSOP, you can kill any message. A calling station can kill only messages ad-
dressed to or from that station. Messages are killed by number, not call sign. The remote
user may enter the "KM" (Kill Mine) command to KILL all of his or her messages that have
been read previously.
5.4.7 L (LIST [Mine])
The "L" command (Host abbreviation L1) shows you the SysOp a list of ALL active mes-
sages on the MailDrop. The list is preceded by the following column header:
Msg# Size To From @ BBS Date Time Title
All active messages are listed under this line with the most recent message first. DAYTIME
must be set for the Date and Time to appear. When a remote user types the LIST com-
mand, the MailDrop lists only the messages that user may read, including messages to
"ALL" and "QST". Messages to other users are not displayed. The MailDrop accepts the LM
(List Mine) command from the remote user. This command acts only on messages ad-
dressed to the remote user, not messages to "ALL" or "QST".
5.4.8 R n (READ n [Mine])
The "R n" command displays the header and text of message number "n". Messages are
read by number, not call sign. As SYSOP, you can read all messages. A remote user may
READ only messages addressed to his call sign, or to "ALL" or "QST". The MailDrop ac-
cepts the RM (Read Mine) command from remote users. This command acts only on mes-
sages addressed to the remote user, not messages to "ALL" or "QST". The RM command
displays only messages that have not been read previously.
5.4.9 S callsign (SEND callsign)
The "S callsign" command notifies the MailDrop that either you as SYSOP or the calling
station will now send text into a message. If 3RDPARTY is ON, then the calling station can
leave a message for a station other than the SYSOP. If the station attempts to leave third
party traffic with 3RDPARTY OFF, then the calling station will see:
*** No 3rd party traffic.
[AEA PK-232M] 18396 free (A,B,H,J,K,L,R,S,V,?) >
If all 18K of the RAM is used, the MailDrop displays the message
*** No free memory
If there is room, the MailDrop displays the Subject request message prompt:
Subject:
Enter a short (up to 27 character) description of the subject of the message. The Mail-
Drop will then send the message prompt:
Enter message, ^Z (CTRL-Z) or /EX to end