Timewave PK-232MBX, Руководство по эксплуатации, Страница: 134 / 231

PK-232 – MBX OPERATING MANUAL COMMAND SUMMARY
4/91 A-9 134
3R dparty ON|OFF Default: OFF
Mode: Packet/MailDrop Host: 3R
Parameters: ON - The MailDrop will handle third party traffic.
OFF - The MailDrop will only handle mail to or from MYCALL or MYMAIL.
If 3RDPARTY is ON, then remote MailDrop users may leave messages for any station.
5B it Immediate Command
Mode: Command Host: 5B
5BIT is an immediate command allowing the user to store 5-bit Baudot transmissions then write a
program to decrypt codes that involve bit inversion or transposition. In 5BIT, a constant of $40 (64
decimal) is added to each received 5-bit character to make it a printable ASCII character in the
range of $40-5F. All characters are treated this way, including CR, LF, LTRS and FIGS.
When the user enters 5BIT, the PK-232 displays "OPMODE now BAUDOT". This is not strictly true;
however, the BAUDOT LED on the front panel will be lit.
RXREV, RBAUD and WIDESHFT must be set properly for the monitored transmission. SIGNAL is
helpful in determining whether a transmission is 5-bit and the settings for RBAUD and RXREV, but
typing OK after SIGNAL selects BAUDOT, not 5BIT.
Do not change modes directly between BAUDOT, 5BIT and 6BIT. Go through some other mode
first, such as Packet. These commands do not function in 5BIT:
BITINV, CCITT, CODE, MARSDISP, TRACE, USOS, WRU and XMIT.
6B it Immediate Command
Mode: Command Host: 6B
Same as 5BIT, except that the unit receives a 6-bit code and adds a constant of $30 (48 decimal)
to yield a range of $30-6F. RXREV, RBAUD and WIDESHFT must be set correctly. SIGNAL is helpful
in determining whether a transmission is 6-bit and the settings for RBAUD and RXREV, but OK will
not automatically select 6BIT.
When the user enters 6BIT, the PK-232 displays "OPMODE now BAUDOT". This is not strictly true;
however, the BAUDOT LED on the front panel will be lit.
Do not change modes directly between BAUDOT, 5BIT and 6BIT. Go through some other mode
first, such as Packet. These commands do not function in 6BIT:
BITINV, CCITT, CODE, MARSDISP, TRACE, USOS, WRU or XMIT.
8B itconv ON|OFF Default: OFF
Mode: Packet/ASCII Host: 8B
Parameters: ON - The high-order bit IS NOT stripped in Converse Mode.
OFF - The high-order bit IS stripped in Converse Mode.
8BITCONV permits packet and ASCII transmission of 8-bit data in Converse Mode. When 8BIT-