Timewave PK-232MBX, Руководство по эксплуатации

Страница: 96 / 231

PK-232 MBX – OPERATING MANUAL AMTOR AND NAVTEX OPERATION
4/91 7-11 96
7.6.5
Caller Prompts
The command prompt that the MailDrop sends the remote user in AMTOR is shortened
from that used in the Packet mode and is shown below:
WX7BBB DE WX7AAA GA+?
TMPROMPT is the AMTOR MailDrop message prompt sent to a remote station by your
MailDrop. The default prompt is:
GA subj/GA msg, '/EX' to end.
Text before the first slash is sent to the user as the subject prompt; text after the slash is
sent as the message text prompt.
7.6.6 Monitor MailDrop Operation
The local user (SYSOP) can monitor the dialog by setting MDMON ON. The PK-232 stays
in command mode during remote access of the maildrop.
7.6.7 SYSOP MailDrop Commands
The MailDrop commands that you the SYSOP have access to are the same as those de-
scribed in Chapter 5 of the manual on MailDrop Operation.
7.6.8 Remote User MailDrop Commands
When a remote user has logged onto your MailDrop the following commands are available
to the distant station:
A, B, H, J, K, L, R, S, V, ?
The remote user may end a command with ? or a carriage return.
A brief description of each command follows in the next sections. The description is ex-
panded where the command operation differs from the Packet Maildrop section found in
Chapter 5.
7.6.8.1 A (ABORT) (Remote only)
The "A" command aborts the listing or reading of messages by the remote calling sta-
tion as described in chapter 5. The difference in AMTOR is that the remote user must
send the ACHG command first to reverse the direction of the link before he can issue
the Abort command. The remote user also has the ability to abort a command that may
have been mis-typed by typing "///" on the same line as the bad command.
7.6.8.2 B (BYE)
The "B" command logs the remote station off the MailDrop. In AMTOR the remote sta-
tion may simply gracefully shut down the link with the RECEIVE character (<CTRL-D>)
or the CWID character (<CTRL-F>).
7.6.8.3 H (HELP)
The "H" command sends the remote station a help list of the available commands
shown in Chapter 5.