12
Abs and %T Measurements—Advanced A-%T-C
Recalling a Test
54
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
Thermo Scientific
Recalling a Test
To recall a test
1. In the Advanced A %T C screen, press
Stored Tests
.
2. Highlight the test you want to recall and press
Enter
.
Use this screen for:
•
•
•
• Viewing the list of stored tests
•
Setting Up Test Parameters
To set up test parameters
1. Highlight the desired parameter.
Some parameters appear only if you select one of the concentration modes, while others
appear regardless of the selected measurement mode. See
for a
complete list.
2. When the parameters are set, press
Save Test
to save the test or
Measure Sample
to
measure a blank or samples.
Taking Measurements
To take measurements automatically (using Auto 6 or Auto 3)
1. Press
Run Sample
.
2. Install the blank and samples.
3. Press
Measure Sample
.
To take measurements manually (using Manual 6 or Single Cell Holder)
1. Press
Run Sample
.
2. When prompted, place the blank and samples into the cell holder.
If the 6-Position Cell Holder is installed, place the blank in the B position and the
samples in positions 1 to 5.
