Thermo Scientific Omni FTIR Multi Gas CEMS, Инструкция по эксплуатации

Страница: 85 / 254

Thermo Fisher Scientific Omni FTIR Multi Gas CEMS Instruction Manual 5-1
Chapter 5
Preventive Maintenance and
Servicing
This chapter includes the following maintenance information and
replacement procedures that should be performed on the Omni FTIR
Multi Gas CEMS to ensure proper operation. Replacement periods for
expendable items are indicated in
Table 5–1 .
For additional service assistance, see “ Service Locations ” at the end of this
chapter.
●
“ Replacement Parts List ” on page 5-3
●
“ Safety Precautions ” on page 5-6
●
“ Cleaning the System ” on page 5-6
●
“ Maintenance for the Sample Probe ” on page 5-7
●
“ Maintenance and Servicing of the FTIR Analyzer Components ” on
page 5-11
●
“ Replacing the Air Filters ” on page 5-29
●
“ Removing the Purge Gas Generator ” on page 5-31
●
“ Removing the Left Side Panel ” on page 5-33
●
“ Removing the FTIR ” on page 5-34
●
“ Replacing the FTIR Power Supply ” on page 5-38
●
“ Replacing the Temperature Sensor ” on page 5-39
●
“ Replacing the Pressure Sensor ” on page 5-41
●
“ Replacing the Gas Cell ” on page 5-42
●
“ Gas Cell Alignment ” on page 5-44
●
“ Replacing the Gas Cell Heater ” on page 5-51
●
“ Replacing the Heated Lines ” on page 5-54
●
“ Replacing the PC ” on page 5-55
●
“ Replacing the PC Console ” on page 5-57