Thermo King SR-2 SmartReefer2, Руководство по диагностике

Страница: 109 / 431

Section 4 – SR-2 Operation
Changing the Setpoint – (continued)
The display then returns to the Standard Display showing the new setpoint. Notice that the arrow now points up,
to indicate that the unit is heating.
OFF
ON
MENU
35
°F
40
CYCLE SENTRY
SET SENSORS GAUGES
POINT
.8
IMPORTANT: If the setpoint is changed using the “+” or “-“ keys, the change must be confirmed or
rejected by pressing the YES or NO soft key within 10 seconds of changing the setpoint.
•
If the YES key is pressed, the setpoint change made with the “+” or “-“ key is accepted, the setpoint
changes, and the display returns to the Standard Display.
•
If the NO key is pressed the setpoint change made with the “+” or “-“ key is not accepted, the setpoint is
not changed, and the display returns to the Setpoint Display.
•
If the YES or NO key is not pressed within 10 seconds of making a change with the “+” or “-“ key, the
setpoint is not changed and the display returns to the Setpoint Display. The display briefly shows
[SETPOINT NOT CHANGED] and Alarm Code 127 Setpoint Not Entered is set, to indicate that the
setpoint change was started but not completed.
4-11
31 January 2005