TEXIO DL-2060, Инструкция по эксплуатации

Страница: 106 / 152

100

-420 Query UNTERMINATED
The multimeter was addressed to talk (i.e., to send data over the interface) but a
command has not been received which send data to the output buffer.

-430 Query DEADLOCKED
A command was received which generates too much data to fit in the output buffer and
input buffer is also full. Command execution continues but all data is lost.

-440 Query UNTERMINATED after indefinite response
The *IDN? Command must be the last query command within a command string.

-451 Scanner no support

-452 Scan function not allow

-453 No tcscanner card

521 Input buffer overflow

522 Output buffer overflow

531 Insufficient memory
There is not enough memory to store the requested number of readings in internal
memory using the INITiate command. The product of the sample count (SAMPle:COUNt)
and the trigger count (TRIGger:COUNt) must not exceed 512 readings.

532 Cannot achieve requested resolution
The multimeter cannot achieve the requested measurement resolution. You may have
specified an invalid resolution in the CONFigure or MEASure command.

540 Cannot use overload as math reference
The multimeter cannot store an overload reading (9.9037) as the math
reference for null or dB measurements. The math state is turned off as a result of this
condition.

550 Command not allowed in local
The multimeter received a READ? Command while in the local mode.