Tennant 8210D, Руководство оператора

Страница: 67 / 110

MAINTENANCE
65
8210D 330210 (6--04)
Interval Key Description Procedure
Lubricant/
Fluid
No. of
Service
Points
100 hours
14 Hydraulic fluid reservoir Check fluid level HYDO 1
100 hours
15 Tires Check all for damage -- 3
2,6 Main sweep brush and
hopper seals
Check for damage or wear -- 8
7 Rear squeegee Check leveling -- 1
10,
11
Tank cover seals Check for damage or wear -- 2
12 Scrub head drag link arm
pivot points
Lubricate SPL 4
200 Hours
17 Rear wheel support
bearings
Lubricate SPL 2
13 Radiator hoses and clamps Check for tightness and wear -- 2
16 Parking brake Check adjustment -- 1
16 Brake pedal Check travel adjustment -- 1
18 Hopper lift arm pivots Lubricate SPL 2
400 Hours 1 Engine Change fuel filter -- 2
15 Front wheel bearings
Check, lubricate, and adjust SPL 2
15
1
Valve clearance (first 400
hours of machine use)
Check / adjust valve clearance -- 2
800 hours 1 Engine Torque intake manifold bolts -- 8
13 Cooling system Flush WG 2
14 Hydraulic fluid reservoir
Change hydraulic fluid HYDO 1
14 Hydraulic fluid reservoir
Replace suction strainer 1
Replace hydraulic breather 1
Replace cap 1
14 Hydraulic fluid filter Change filter element -- 1
-- Hydraulic hoses Check for wear and damage -- All
1 Propelling motor
H
Torque shaft nut -- 1
17 Rear wheel
H
Torque wheel nuts -- 1
1 Battery
H
Clean and tighten battery cable
connections
-- 1
LUBRICANT/FLUID
EO
Engine oil, diesel rating above CD grade only. . . . .
HYDO Tennant or approved hydraulic fluid .
WG Water and permanent-type ethylene glycol anti-freeze, --34
_
C (--30
_
F) . . .
SPL Special lubricant, Lubriplate EMB grease (Tennant part number 01433--1) . . .
NOTE: More frequent intervals may be required in extremely dusty conditions.