MAINTENANCE
85
8210D 330210 (1--98)
SCRUB BRUSHES
Two disc-type scrub brushes scrub the floor.
Optional three brush scrub heads are available. A
spring lock clip holds the scrub brushes onto the
drive hubs.
The scrub brushes should be checked daily for
tangled wire or string, wear, and damage. The
brushes should be replaced if large portions of the
brush bristles are missing or if the remaining
brush bristle measure 0.50 in (12 mm) or less in
length.
NOTE: Replace all scrub brushes at the same
time to ensure equal scrubbing performance.
To use the stripping, scrubbing, buffing, or
polishing pads, install the pads onto brush drivers.
Secure each pad onto the driver with a pad
retaining plug. Install the brush drivers in place of
the normal scrubbing brushes. Use the normal
amount of detergent and water.
