Teledyne 200E Скачать руководство пользователя страница 55

Страница: 55 / 302

Optional Hardware and Software

Model 200E Instruction Manual

in which the sample gas has a significantly reduced or highly variable concentration of

oxygen need to use the separate dryer option 86. The combination conditioner needs to be
specified upon ordering the analyzer.

5.9. Manual on CD (Part number 044100200)

This operators manual is also available on CD. The electronic document is stored in Adobe
Systems Inc.

Portable Document Format

(PDF) and is viewable with Adobe Acrobat Reader

software, which can be downloaded for free at http://www.adobe.com/

The PDF version of the manual has many advantages:

•

Fully searchable text.

•

Hypertext links for figures, tables, table of contents and embedded references for

quick access of individual manual portions.

•

A list of thumbnails, chapters and sections displayed at the left of the text, all linked

to their respective location.

•

Internet links embedded in the manual will open the corresponding web sites in an

internet browser (requires an internet connection).

5.10. Extended Warranty (Options 92 & 93)

Two options are available for extending the standard manufacturer’s warranty

(Section 2.3). Both options have to be specified upon ordering the analyzer.

Option Number

Description

OPT 92

Extends warranty to cover a two (2) year period from the
date of purchase.

OPT 93

Extends warranty to cover a five (5) year period from the
date of purchase.

044100102 Rev A

Содержание 200E















































































































































































































































































































Результаты поиска

Содержание 200E

Отзывы:

Teledyne 200E, Инструкция по эксплуатации, Страница: 55 / 302

Результаты поиска

Содержание 200E

Отзывы: