Teledyne 200E Скачать руководство пользователя страница 16

Страница: 16 / 302

Model 200E Instruction Manual

M200E Documentation

1. M200E DOCUMENTATION

1.1. Available Documentation

Thank you for purchasing the Model 200E Nitrogen Oxides Analyzer! The documentation for
this instrument is available in different formats:

•

Printed format, part number 044100100

•

Electronic format on a CD-ROM, part number 044100200

The electronic manual is in Adobe

Systems Inc. “Portable Document Format” (PDF). The

Adobe

Acrobat Reader

software, which is necessary to view these files, can be

downloaded for free from the internet at http://www.adobe.com/.

The electronic version of the manual has many advantages:

•

Keyword and phrase search feature

•

Figures, tables and internet addresses are linked so that clicking on the item will

display the associated feature or open the website.

•

A list of chapters and sections as well as thumbnails of each page are displayed to

the left of the text.

•

Entries in the table of contents are linked to the corresponding locations in the

manual.

•

Ability to print sections (or all) of the manual

Additional documentation for the Model 200E Nitrogen Oxides Analyzer is available from T-
API’s website at http://www.teledyne-api.com/manuals/

•

APICOM software manual, part number 03945

•

Multi-drop manual, part number 02179

•

DAS manual, part number 02837.

•

Ethernet configuration document, part number 04324.

Other documentation may be added to the website in the future.

1.2. Manual Structure

1.0 Table of Contents:

Outlines the contents of the manual in the order the information is presented. This is a good

overview of the topics covered in the manual. There is also a list of appendices, figures and
tables. In the electronic version of the manual, clicking on a any of these table entries

automatically views that section.

044100102 Rev A

Содержание 200E















































































































































































































































































































Результаты поиска

Содержание 200E

Отзывы:

Teledyne 200E, Инструкция по эксплуатации, Страница: 16 / 302

Результаты поиска

Содержание 200E

Отзывы: