TECO F33 Series, Инструкция по эксплуатации, Страница: 147 / 192

144 Functional Description
11.7.2 Status [720]
VSD Status [721]
Indicates the overall status of the variable speed drive.
Fig. 113VSD status
Example: “A/Key/Rem/TL”
This means:
A:
Parameter Set A is active.
Key: Reference value comes from the keyboard
(CP).
Rem: Run/Stop commands come from terminals 1-
22.
TL: Torque Limit active.
Warning [722]
Display the actual or last warning condition. A warning
occurs if the VSD is close to a trip condition but still in
operation. During a warning condition the red trip LED
will start to blink as long as the warning is active.
The active warning message is displayed in menu
[722].
If no warning is active the message “No Warning” is dis-
played.
The following warnings are possible:
Communication information
See also the Chapter 12. page 151.
Display
position
Status Value
1 Parameter Set A,B,C,D
222
Source of reference
value
-Key (keyboard)
-Rem (remote)
-Com (Serial comm.)
-Opt (option)
333
Source of Run/
Stop/Reset com-
mand
-Key (keyboard)
-Rem (remote)
-Com (Serial comm.)
-Opt (option)
44 Limit functions
-TL (Torque Limit)
-SL (Speed Limit)
-CL (Current Limit)
-VL (Voltage Limit)
- - - -No limit active
721 VSD Status
Stp 1/222/333/44
722 Warnings
Stp warn.msg
Fieldbus
integer
value
Warning message
0 No Error
1 Motor I²t
2 PTC
3 Motor lost
4 Locked rotor
5 Ext trip
6 Mon MaxAlarm
7 Mon MinAlarm
8 Comm error
9 PT100
11 Pump
12 Ext Mot Temp
13 LC Level
14 Not used
15 Option
16 Over temp
17 Over curr F
18 Over volt D
19 Over volt G
20 Over volt M
21 Over speed
22 Under voltage
23 Power fault
24 Desat
25 DClink error
26 Int error
27 Ovolt m cut
28 Over voltage
29 Not used
30 Not used
31 Not used
Modbus Instance no/DeviceNet no: 31016
Profibus slot/index 121/160
Fieldbus format Long
Modbus format UInt