TECO F33 Series, Инструкция по эксплуатации, Страница: 121 / 192

118 Functional Description
Communication information
Fig. 101
Fig. 102 Normal full-scale configuration
Fig. 103 2–10 V/4–20 mA (Live Zero)
AnIn1 Advanced [513]
AnIn1 Min [5131]
Parameter to set the minimum value of the external ref-
erence signal. Only visible if [512] = User mA/V.
Communication information
User Bipol
mA
3
Sets the input for a bipolar current input,
where the scale controls the range for the
input signal. Scale can be defined in
advanced menu AnIn Bipol.
0–10V 4
Normal full voltage scale configuration of
the input that controls the full range for the
input signal. See Fig. 102.
2–10V 5
The voltage input has a fixed threshold
(Live Zero) of 2 V and controls the full range
for the input signal. See Fig. 103.
User V 6
The scale of the voltage controlled input,
that controls the full range for the input sig-
nal. Can be defined by the advanced AnIn
Min and AnIn Max menus.
User Bipol
V
7
Sets the input for a bipolar voltage input,
where the scale controls the range for the
input signal. Scale can be defined in
advanced menu AnIn Bipol.
NOTE: For bipol function, input RunR and RunL needs to
be active and Rotation, [219] must be set to “R+L”.
NOTE: Always check the needed set up when the setting
of S1 is changed; selection will not adapt automatically.
Modbus Instance no/DeviceNet no: 43202
Profibus slot/index 169/106
Fieldbus format UInt
Modbus format UInt
20 mA
100 %
100 %
n
(NG_06-F21)
10 V
0
-10 V
Speed
NOTE: The different menus will automatically be set to
either “mA” or “V”, based on the selection in AnIn 1
Setup [512].
Default: 0 V/4.00 mA
Range:
0.00–20.00 mA
0–10.00 V
Modbus Instance no/DeviceNet no: 43203
Profibus slot/index 169/107
Fieldbus format Long
Modbus format EInt
20mA
100 %
n
(NG_06-F21)
0
10 V
Ref
0–10 V
0–20 mA
0
0mA 2
100 %
n
4mA
10 V 2 V
2–10 V
Ref
4–20 mA
513 AnIn1 Advan
Stp
A
5131 AnIn1 Min
Stp 0V/4.00mA
A