TECO F33 Series, Инструкция по эксплуатации, Страница: 138 / 192

Functional Description 135
Analogue Comparator 2 Value [614]
Function is identical to analogue comparator 1 value.
Communication information
Analogue Comparator 2 Level High
[615]
Function is identical to analogue comparator 1 level
high.
Communication information
Analogue Comparator 2 Level Low
[616]
Function is identical to analogue comparator 1 level
low.
Communication information
Digital Comparator 1 [617]
Selection of the input signal for digital comparator 1
(CD1).
The output signal CD1 becomes high if the selected
input signal is active. See Fig. 110.
The output signal can be programmed to the digital or
relay outputs or used as a source for the virtual connec-
tions [560].
Fig. 110Digital comparator
Communication information
Digital Comparator 2 [618]
Function is identical to digital comparator 1.
Default: Torque
Selections: Same as in menu [611]
Modbus Instance no/DeviceNet no: 43404
Profibus slot/index 170/53
Fieldbus format UInt
Modbus format UInt
Default: 20%
Range: Enter a value for the high level.
Modbus Instance no/DeviceNet no: 43405
Profibus slot/index 170/54
Fieldbus format
Long
1=1 W, 0.1 A, 0.1 V,
0.1 Hz, 0.1
°
C, 1 kWh,
1H, 1%, 1 rpm or 0.001
via process value
Modbus format EInt
Default: 10%
Range: Enter a value for the low level.
614 CA2 Value
Stp Torque
A
615 CA2 Level HI
Stp 20%
A
616 CA2 Level LO
Stp 10%
A
Modbus Instance no/DeviceNet no: 43406
Profibus slot/index 170/55
Fieldbus format
Long,
1=1 W, 0.1 A, 0.1 V,
0.1 Hz, 0.1
°
C, 1 kWh,
1H, 1%, 1 rpm or 0.001
via process value
Modbus format EInt
Default: Run
Selection: Same selections as for DigOut 1 [541].
Modbus Instance no/DeviceNet no: 43407
Profibus slot/index 170/56
Fieldbus format UInt
Modbus format UInt
Default: DigIn 1
Selection: Same selections as for DigOut 1 [541].
+
-
(NG_06-F126)
Signal: CD1
Digital signal:
Menu [617]
DComp 1
617 CD1
Stp Run
A
618 CD 2
Stp DigIn 1
A