TECO F33 Series, Инструкция по эксплуатации, Страница: 143 / 192

140 Functional Description
Timer 1 T1 [644]
When timer mode is set to Alternate and Timer 1 is ena-
bled, this timer will automatically keep on switching
according to the independently programmable up and
down times. The Timer 1 in Alternate mode can be ena-
bled by a digital input or via a virtual connection. See
Fig. 112. Timer 1 T1 sets the up time in the alternate
mode.
Communication information
Timer 1 T2 [645]
Timer 1 T2 sets the down time in the alternate mode.
Communication information
Timer 1 Value [649]
Timer 1 Value shows actual value of the timer.
Communication information
11.6.5 Timer2 [650]
Refer to the descriptions for Timer1.
Timer 2 Trig [651]
Communication information
Timer 2 Mode [652]
Default: 0:00:00 (hr:min:sec)
Range: 0:00:00–9:59:59
Modbus Instance no/DeviceNet no:
43436 hours
43437 minutes
43438 seconds
Profibus slot/index
170/85, 170/86,
170/87
Fieldbus format UInt
Modbus format UInt
Default: 0:00:00, hr:min:sec
Range: 0:00:00–9:59:59
Modbus Instance no/DeviceNet no:
43439 hours
43440 minutes
43441 seconds
Profibus slot/index
170/88, 170/89,
170/90
Fieldbus format UInt
Modbus format UInt
NOTE: Timer 1 T1 [644] and Timer 2 T1 [654] are only
visible when Timer Mode is set to Alternate.
644 Timer 1 T1
Stp 0:00:00
A
645 Timer1 T2
Stp 0:00:00
A
Default: 0:00:00, hr:min:sec
Range: 0:00:00–9:59:59
Modbus Instance no/DeviceNet no:
42921 hours
42922 minutes
42923 seconds
Profibus slot/index
168/80, 168/81,
168/82
Fieldbus format UInt
Modbus format UInt
Default: Off
Selection:
Same selections as Digital Output 1 menu
[541].
Modbus Instance no/DeviceNet no: 43451
Profibus slot/index 170/100
Fieldbus format UInt
Modbus format UInt
Default: Off
Selection: Same as in menu [642]
649 Timer1 Value
Stp 0:00:00
A
651 Timer2 Trig
Stp Off
A
652 Timer2 Mode
Stp Off
A