Teac GX-1, Инструкция по эксплуатации

Страница: 10 / 122

Introduction
1-5
Media (recording Sampling frequency x number of Recording time (at maximum
capacity) channels (at maximum) transmission rate)
Memory (256 MB) 3,200 k (e.g., 200 k x 16 channels) Approx. 40 sec.
AIT (25 GB) 1,500 k (e.g., 50 k x 30 channels) Approx. 138 min. max.
MO (1.3 GB) 200 k (e.g., 20 k x 10 channels) Approx. 50 min. max.
PC card 50 k (e.g., 5 k x 10 channels) Depends on the card capacity
Media on PC 1,500 k (e.g., 50 k x 30 channels) Depends on the type of media
Sampling Frequency vs. Recording Time
(Up to 32 channels)
Sampling frequency
200 kHz 100 kHz 50 kHz
≤
20 kHz
Waveform Manual start recording OK OK OK OK
Level trigger recording —
∆
OK OK
Reproducing — OK OK OK
FFT Manual start recording — — OK* OK
Level trigger recording — —
∆
OK
Reproducing — — — —
Bar graph Manual start recording — — OK OK
Level trigger recording — — OK OK
Reproducing — — — —
Sampling Frequency and Monitoring (Up to 32 channels)
* : When no expansion unit is added, up to 8 channels are displayable. When one expansion
unit is added, up to 6 channels are displayable. When two or three expansion units are
added, up to 4 channels are displayable.
∆
: Monitoring not supported