Teac GX-1, Инструкция по эксплуатации

Страница: 32 / 122

Basic Operations
3-5
longer
than
3 sec.
From the initial window, follow the flow below.
Other procedures may cause malfunction.
Operation Flow
Initial Window
Waveform display Data transfer
File name/condition setting Recording of data in memory after recording
File setting
[File]—[New]
(p. 3-22)
System setting
[Setup]—[System]
(p. 3-26)
Misc setting
[Setup]—[Misc]
(p. 3-31)
Params setting
[Setup]—[Params]
(p. 3-31)
Select waveform
display
(p. 3-11)
Click
Rec Standby
(p. 3-6)
Click Start
Click Stop
Select waveform
display
(p. 3-11)
Data transfer
[Edit]—[Copy]
(p. 3-25)
longer than 3 sec.
Note:
Click OK on each setting submenu following the steps
above even if you want to change only one setting item. For
example, if you enter a new file name, do not start recording
at once but open submenus from the Setup menu and click
OK at each submenu.
Event mark writing
Recording pause