Teac GX-1, Инструкция по эксплуатации

Страница: 71 / 122

Specifications
4-4
Signal conditioner slots : 8
Recording device slot : 1 (for AIT drive)
Memory : DIMM 32—256 MB
Interface : SCSI (connector 50-pin half size x 1, built-in terminator)
Contact-point control : START, STOP, EVENT, REC STANDBY
Expansion bus connector : 1 (common)
DIGITAL CONTROL connector : 1 (time code, external sampling clock input)
Monitor channel analog output : 1 (no filter, output level fixed to ±5 V)
Microphone jack : 1
Speaker/earphone jack : 1 each
Sampling frequencies:
Internal clock : 1, 2, 5, 10, 20, 50, 100, 200, 500 Hz
1, 2, 5, 10, 20, 50, 100, 200, 2.5, 12.5, 25 kHz
Multi-sampling : From the internal clock frequencies, you can select a base sampling
frequency and 10 times the base sampling frequency slot by slot at a
time.
External clock : Up to the maximum sampling frequency of each signal conditioner
Note: The total of [sampling-frequency
x number-of-channels] must
not exceed 3,200 kHz.
Power : +11 to 30 V DC
Built-in AC adaptor: for 100 V: 90 to 130 V, 50 to 400 Hz
for 200 V: 180 to 260 V, 50 to 400 Hz
Battery (option)
Power consumption : Approx. 45 W (DC power supply, w/ 8 DC input amps, w/o drive)
Approx. 75 W (Using AC adaptor, w/ 8 DC input amps, w/o drive)
Operating temperature : 0 to 40ºC (32 to 104ºF)
Storage temperature : –20 to 60ºC (–4 to 140ºF)
Operating humidity : 20 to 80% RH (non-condensing)
Vibration : MIL-STD-810D Figure 514.3-1, 2, 3
External dimensions : Approx. 300W x 85H x 200D (mm) (excluding protruding parts)
Mass: Approx. 5 kg (including 8 DC input amps and an AC adaptor)
■
Specifications when AIT drive installed
Power consumption : Approx. 58 W (w/ DC input amp for all channels)
Operating temperature : 5 to 35ºC (41 to 95ºF)
Storage temperature : –20 to 60ºC (–4 to 140ºF)
Vibration : MIL-STD-810C Figure 514.2-6 V Curve (1.5G, vertical)
Mass: Approx. 5.75 kg (including 8 DC input amps and an AC adaptor)
■
Specifications when MO/PC card drive installed
Power consumption : Approx. 52 W (w/ DC input amp for all channels)
Operating temperature : 5 to 35ºC (41 to 95ºF)
Storage temperature : –20 to 60ºC (–4 to 140ºF)
Mass: Approx. 5.5 kg (including 8 DC input amps and an AC adaptor)
Specifications are subject to change without notice.
Specifications for the GX-1 Main Unit