Teac GX-1, Инструкция по эксплуатации

Страница: 66 / 122

Explanations of Menus
3-39
■
About Auto Range
You can automatically optimize the input ranges for analog type amplifiers. The
input ranges of all channels of the analog type amplifiers are optimized at a time.
• You cannot use this function when the sampling frequency (the higher frequency
in multi-sampling) is higher than 50 kHz or when you sweep the external sampling
clock.
1.
From the
Setup
menu, choose
Params
and click
Auto Range
.
The box below appears.
2. Click Start .
The message in the box changes to "Calculate range...".
3. Input the actual signals.
4. After the signals are finished, click Stop .
5.
Click
Close
.
The input ranges changed by this function are displayed in red in the
Parameters
window.