Teac GX-1, Инструкция по эксплуатации

Страница: 34 / 122

Basic Operations
3-7
Event
▼
8.
Click the Event button ( ).
The Number of IDs area displays 001-001.
9.
Click the Rec Standby button ( ).
Recording of the first ID stops, and the system enters a pause status. The
Activity area displays REC PAUSE.
10.
Click the Start button ( ).
Recording of the second ID starts, and the Number of IDs area displays 002-000.
11.
Click the Stop button ( ).
Recording stops, and the following message is displayed.
12.
Click
Yes
.
The two IDs of data are transferred to the PC.
Note:
Even if you click No , you can still transfer data to a PC or removable medium by
choosing
Edit
and then
Copy
.
▼
There must be at least three seconds between
Start and Stop.
▼
This message is displayed each time recording
stops because when the power to the main unit
is turned off, data in memory is lost.
▼
When you use the optional remote controller,
you can choose “Yes” by pressing the START
button, or “No” by pressing the EVENT but-
ton.
▼
Clicking the Cancel button cancels the transfer
of the next file, not the file currently being
transferred.
▼
The following four files are created in the spec-
ified directory.
xxxxx001.dat
xxxxx001.hdr
xxxxx002.dat
xxxxx002.hdr
w h e r e xxxxx i s t h e e n t e r e d f i l e n a m e .
▼
If the PC’s drive becomes full during transfer,
the message “Not enough drive space” will
appear. In this case, the data is not transferred
to the PC, but remains in the GX-1’s memory.
You can transfer the data to the PC’s another
drive by choosing
Edit
and then
Copy
.
NOTE
Do not do the following operations during recording (during
REC STANDBY, RECORDING, or REC PAUSE) as they
may cause system instability:
• change monitored channel
• change displayed channels
• click Event button at shorter intervals than two seconds
Leave longer than two seconds period between key/mouse
operations.
▼
The number of scans at this moment is recorded
in the header file.
▼
There must be at least two seconds between
event marks. No event mark is attached if the
time is less than two seconds.
▼
When FFT display is selected, the event mark
writing is delayed. Select waveform display to
prevent this delay.
Standby Start Pause Restart Stop
ID 001 ID 002