Teac GX-1, Инструкция по эксплуатации

Страница: 98 / 122

Amplifiers
4-31
■
Specifications
Number of channels : 2
Electric charge sensitivity : 0.1 to 999 pC/G
Range : 1, 5, 10, 50, 100, 500 G
(100 G and the 500 G range cannot be used when
the electric charge sensitivity is 100 pC/G or higher)
(1 G and the 5 G range cannot be used when the
electric charge sensitivity is lower than 1 pC/G)
Range accuracy* : 3%
S/N ratio* : 62 dB (typical), 60 dB or better (10 pC/G; sampling:
50 kHz; input range: 10 G; LPF: 10 kHz)
Frequency response : 1 Hz to 30 kHz (–3 dB)
Low pass filer : 100, 200, 500, 1 k, 2 k, 5 k, 10 kHz
(–3 dB at the cutoff; attenuation: –48 dB/oct)
A/D converter : 16-bit
Sampling frequency : 1 Hz to 200 kHz
Power consumption : Approx. 2.16 W
Input connector : MICRO DOT 10-32UNF
*At temperatures of +23˚C±5˚C
■
Settings
The following dialog box appears when you choose
Setup
and
Params
, and
then double-click the channel that you want to set.
Channel : Select ENABLE to record with this channel, or select DIS-
ABLE not to record with this channel.
Range
: Select the range.
Sample Frequency
: You can select 10 times the
Base Sample Freq
when you turn on Multi Sampling check box.
Channel Name : You can name the channel. Use up to 16 alphanumeric
characters.
Sensor
: Enter the sensor sensitivity.
Filter : Select the filter cutoff frequency.
All Charge Amp Same Condition : When this option is selected, the same
parameters are set for all signal conditioners of the same type.
▼
Enable both channels of a slot.
▼
Filter cutoff frequency is set slot by slot, not channel
by channel.
1 G = 9.81 m/s
2