Connections and settings
Connecting to AV IN 2 sockets
20
DRH-5700x
PAY TV/Canal Plus channels can only be viewed or
recorded if a decoder (not included) is connected to
the recorder. Disconnect the recorder from the power
supply before connecting the decoder.
Set the option [Decoder On/Off] in the [Program List] tu-
ner menu to [On] (see page 22) to display or record PAY
TV/Canal Plus channels.
Important!
The connected decoder cannot receive sig-
nals unless the recorder is connected to the
mains power supply.
The connection type may vary depending on
the PAY TV provider.
Connecting a satellite receiver or video re-
corder
Connect a satellite receiver, video recorder or similar
device to the SCART IN/DECODER socket . Press the
SOURCE button to select SCART (see page 46) and
play or record a source signal at the SCART
IN/DECODER socket.
Tip
The recorder does not need to be switched on to play
the signals from the tuner connected to the television.
Notes
•
Motion pictures with copy-protected signals can-
not be recorded.
•
If these signals are directed via a video recorder,
the picture on the screen may not be displayed
correctly. Connect the video recorder, recorder
and television in the sequence indicated. Video
films must be played via a second line input on
the television.
•
The connected video recorder or receiver cannot
transmit signals if the recorder is disconnected
from the mains power supply.
Connecting to AV IN 2 sockets
Connect the input sockets (AV IN 2) on the recorder to the
audio/video output sockets or the S-VIDEO output socket
on the auxiliary device using an A/V cable or S-VIDEO
cable.
