Setup menu
Using the setup menu
22
DRH-5700x
Setup menu
Using the setup menu
The following basic settings are defined in the setup
menu: language, password, output configuration and
unit settings. These basic settings can be altered in
the setup menu and are stored even if the unit is dis-
connected from the power.
1. Press SETUP to open the setup menu. The se-
lected root menu is highlighted yellow.
The screen menus contain the following information
areas:
No. Designation
1
Root menu
2
Submenu
3
Settings
4
Bottom bar with variable buttons for navigating or
changing unit settings.
2. Press
S
/
T
to select a root menu item. Submenus
and any available settings are then displayed.
3. Press ENTER or
X
to open the submenu. The
mark indicates the selected submenu.
4. Press
the
S
/
T
buttons to select an item in the
submenu. The settings then appear. Active set-
tings are marked with a tick. Many submenu items
do not have settings but functions such as [Chan-
ge Password]. Press ENTER to activate the func-
tion.
5. Press
the
S
/
T
buttons to select and ENTER to
activate settings. Further steps are required for
some options.
6. The remote control buttons available for operation
appear in the bar at the bottom of the screen.
7. Press RETURN or
W
to navigate back to the me-
nu.
8. Press SETUP to exit the root menu.
Tuner menu
Automatic search
This recorder is equipped with a frequency tuner that
can receive up to 255 TV channels.
Preparation
•
Connect the recorder to the required antenna ty-
pe as described in the chapter "Connecting the
antenna" on page 16.
1. Select the submenu [Auto Scan] and press EN-
TER.
2. The channel search starts. The tuner automati-
cally displays all channels available in the area
one after the other and stores them in the mem-
ory.
Note
During the channel search, the progress bar
indicates the progress of the search and the
number of located channels.
Program list
Channels can be edited manually (move, activate, re-
name, set manually).
1. Select the submenu [Program List] and press EN-
TER.
2. The channel list appears.
3. Press
S
/
T
to select a channel.
4. Press
W
to select the editing option and then
press ENTER.
1
2
3
4
