Setup menu
Disc menu
DRH-5700x
23
•
[Move Up], [Move Down] are used to move chan-
nels to a different memory location.
•
[Inactive] is switched to [Off]. When browsing
through channels using the buttons
S
CH
T
, the
system skips channels that are set to inactive.
Only active channels appear.
•
[Decoder] sets channels for the decoder. This set-
ting is required for displaying or recording PAY
TV/Canal Plus programs.
•
[Rename] opens the keypad menu for entering
characters (see page 49). Names can only be a
maximum of 5 characters long.
•
[Manual Setting] opens the window for setting
stations manually. See the description below.
5. Press RETURN several times to exit the Program
List menu.
Editing programs
Set up television stations manually as follows.
1. Select the program, select the option [Manual Set-
ting] in the program list and then press ENTER to
confirm.
2. Press
W
/
X
to select an option and
S
/
T
to modify
the setting.
•
[PR] indicates the channel position.
•
[Search/MHz] Reception frequency. This setting
should not be changed.
•
[CH] Channel number provided by the station.
This setting should not be changed.
•
[MFT] Fine channel tuning for a perfect picture.
Press
S
/
T
.
•
[Standard] Selects the PAL, SECAM or NTSC
television system.
3. Press ENTER to adopt the settings and return to
the Program List menu.
Country settings
Press
S
/
T
to select a country and press ENTER to
confirm. An automatic search then starts (page 22).
Channel mapping
Assign VideoPlus numbers to TV programs (see 45).
Automatic installation
Press ENTER to confirm. Automatic installation then
starts (page 21).
Disc menu
Disc formatting (initialisation)
The recorder automatically formats blank discs in-
serted in the loader. The message FORMAT appears
on the DISPLAY.
•
DVD-R
: The recorder formats the disc in video
recording mode.
•
DVD-RW/DVD+RW/DVD+R(DL)
: These discs are
formatted automatically, the message FORMAT
appears on the display.
•
DVD-RAM, CD-R, CD-RW
discs cannot be for-
matted.
DVD-RW/DVD+RW discs can be formatted several
times in the setup menu. The disc menu is disabled if
non-recordable discs are inserted.
1. Select [Format] and press ENTER.
2. Select the mode [DVD+VR] and press ENTER. A
confirmation message appears.
Important!
All data is deleted when the disc is format-
ted.
3. Press
W
/
X
to select [OK] and then press ENTER.
Disc formatting may take a few minutes. The sys-
tem returns to the Setup menu when formatting is
complete.
