T A L K S W I T C H I N S T A L L A T I O N
13
A four-line phone can use two splitters to join the four lines as shown in
Figure 11
.
Figure 11: Four-line phone on two splitters
Connecting an IP phone
Plug the IP phone into your switch/hub and configure it as described in
Adding IP phoneS
on
page 82. If you are using an unsupported IP phone, refer to its user guide for
configuration instructions.
Connecting a modem
Plug the modem’s telephone cable into a unit extension jack. Your modem is now an extension
that can access all lines and take advantage of call routing features.
If you don’t want to change your dial-up settings for the modem, enable Direct Line Access for
the extension associated to the modem. For more information, see
Direct line access
on page 62.
A modem connected to a TalkSwitch unit operates at up to 28 kbps.
