T A L K S W I T C H C O N F I G U R A T I O N
185
1. Choose
Troubleshooting > Telephone Lines > Audio
. The
Telephone Lines - Audio
window appears.
2. Calibrate the TalkSwitch unit to match the far end impedance of the telephone lines:
a) Click
Calibrate Lines
. The
Calibrate Lines
window appears.
b) Select the line(s) to calibrate, and then click
Run Calibration
.
For more information on calibration, see
Line optimization
on page 132.
3. For each telephone line, set the transmit level to callers. This affects the volume for remote
callers, not internal users. Choices are:
•
Louder
•
Default
•
Quieter
Telephone Lines > Detection and Timers
The
Telephone Lines > Detection and Timers
command allows you to set telephone line
timers, and perform the ring pattern test.
CAUTION:
Calibrating the telephone lines, and then overriding the outbound volume level can
degrade system performance.
