T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 78 / 200

76
Configuration Configuring the Comfort Pro S
An installed fax card is condition to configure fax boxes. For further information about installing, please refer
to the chapter Installing a Fax/V.24 Card starting on page 36. You can view and if necessary change the Fax/
V.24 card’s status in the Configurator . To do this, call up the Telephony: Ports: Slots menu item. As a fax card
is installed, you will see a green tick in the Status column in the table.
As of the 2.0 release of the system software you receive a licence for one central fax box that is already
activated on delivery (please refer to the Configurator System: Licences menu). A licence is required to
configure more fax boxes. Ten another fax boxes can be configured per each licence. Maximal two licences
are possible to add.
In order to configure fax boxes, call up the User Manager: Fax boxes status page. You will receive an
overview of fax boxes that have already been configured.
For further information about configuring, changing and deleting fax boxes, refer to the online help
documentation of the Configurator .
Setting up an Internet Connection from Remote (ISP Trigger Call)
Z
(reserved tel. no.)
Z
(system PIN)
* #
If the communications system is connected to the Internet via a dialup connection, a user can initiate from
external that the system establishes an Internet connection (ISP Trigger call). The system is then reachable via
the Internet and enables to set up a connection for a VPN connection via RAS.
Loading SW Updates
New versions of the system and terminal software can be loaded to the system.
New software versions of the Comfort Pro S are loaded from the configuration PC, which accesses the
Configurator (see the System: Firmware menu). For information on connecting a configuration PC, see Brief
Guide to Initial Configuration on page 67.
The terminal software is part of the Comfort Pro S software and is automatically loaded into the terminals via
the Comfort Pro S.
For further information, refer to the online help documentation under the item System: Firmware .